…I am not a morning person With that said; when I do wake up it is very hard for me to go back to bed. So I decided I can watch tv while browsing IG, 9gag, and reddit or go somewhere I haven’t been in years. After a quick oil and tire check; it was…
Rolled Out Only To Clean
This car does not see much time out of the garage in recent year. On average only a couple hundred miles a year; even while on lockdown and working from home full time for almost a year. I thought i would have alot more time to enjoy the car; sadly i see it mostly only…
N15 Design Hood Vent
Lets start off by saying its never recommended to chop up an ASM hood just to add a piece of aluminum. However the amount of heat in the engine bay here in our sunny socal weather can be too much at times. I purchased a vent originally made for the BMW E46; took a dremel…
Refurbishing
My MRacing mirrors had alot of miles on them, and the rock chips as well as the hard California sun caused the clearcoat to fade, crack, and peel. I purchased sandpaper and went to work. Going over the carbon with 800 grit and then 1500 grit. I give the mirrors two coats of Matte clear;…
Engine bay & Maintenance
Added and changed a few things. I purchased a new titanium bonnet bar, as well as put back in the OEM intake box. A new engine cover was also added to clean it up a bit. I also changed out the trans and diff fluid with fresh Motul. I also added Spoon engine and trans…
Updates to the interior
Since my last post a few things have been added and changed. The following items have been added to the interior. Carbon Fiber Door Cards ASM Steering Boss Mugen Passenger Side Seat Rail Renegade Motorsports Carbon Center Console Werks11 Alcantara Door Pulls With the added space of the ASM hub i was also able to…
Stumptown | Snake | Fathers
On the first Saturday of June 2018, myself and a few other S2000 owners had a small meet up for coffee, cruise, and lunch. Our morning started early to get the upper hand on the normality of Los Angeles traffic. 7:00 AM was the set time, and it looks like everyone made it on time…
New Valve Cover
I had ordered a new valve cover in a powdercoated “wrinkle” red. It looked pretty good, and after the pain in the ass job of removing the old oil stained, chipped paint one. It really brought color to the engine bay, and i am really happy with how it turned out; even though im not…
Loosen up the rear
It was time for a front splitter to loosen up the rear of the car, and balance out the big wing. A buddy of mine Oscar took on the headache of getting a 4″ protrusion from the bumper equally; with two inches of overhang on each side. Oscar had to use some of his other…
itshammertime.wordpress.com 